HobbyKing
DISCOVERY (RED) BALSA HI-WING TRAINER GLOW/EP 1620MM (ARF)
| Wingspan | 1620mm |
| Length | 1250mm |
| Wing Area | 45dm2 |
| Weight | 2200g ~ 2500G |
Features:, • Excellent "club" size Trainer, Specs:, Requires:, Your Own 4~6 Channel TX/RX,
Size matters no matter what they say.....and that also applies ...HobbyKing
DISCOVERY (BLUE) BALSA HI-WING TRAINER GLOW/EP 1620MM (ARF)
| Wingspan | 1620mm |
| Length | 1250mm |
| Wing Area | 45dm2 |
| Weight | 2200g ~ 2500G |
Features:, • Excellent "club" size Trainer, Specs:, Requires:, Your Own 4~6 Channel TX/RX,
Size matters no matter what they say.....and that also applies ...HobbyKing
E-FUSELAGE FOR SUNBIRD FULLY MOULDED COMPOSITE SLOPE SOARER
Features:, • Fully moulded composite construction,
This is an optional E-fuselage for the Sunbird composite slope ...HobbyKing
ORANGERX RX3S 3-AXIS FLIGHT STABILIZER V2 (V2.1 FIRMWARE) (V-TAIL/DELTA/AUX)
| Gyro | 3-Axis MEMS |
| Input Voltage | 4.8-6.0V |
| Signal from Receiver | 1520us |
| Signal to Servo | 1520us |
| Size | 44x26x14mm |
| Weight | 10g |
*Note:, All RX3S V2 stabilizers now ship with an upgraded firmware version (V2.1) which provides improved stability and better support for high-sensitivity digital servos., Features:, • Capable of stabilizing flight on just about any fixed wing aircraft (including V-tail/Delta models), Specs:, IC:Atmega168PA,
The RX3S OrangeRX Flight Stabilizer V2 adds support for V-tail ...5 Reviews
ReadyMadeRC
DJI NAZA H - HELICOPTER STABILIZATION CONTROLLER
| 7.4V | 0.25 |
| 5.8V | 0.375 |
| Vertical | ± 0.8m, horizontal |
GetFPV
5.8 GHZ 11 DBI FLAT PATCH ANTENNA WITH FEMALE SMA CONNECTOR
| < 1.5 | 1 avg. |
ReadyMadeRC
AIMDROIX ALUMINUM ARMS FOR DJI MULTIROTORS (BLACK)
| Motor mounting holes | 16mm to 25mm |
| Weight | 68 grams. (DJI Stock arms 54g) |
Features:, Stronger and stiffer than the stock plastic arms.,
50mm longer than stock plastic arms. Works as a heat ...ReadyMadeRC
AIMDROIX ALUMINUM EXTENDED ARM FOR DJI MULTIROTORS V1.5 (RED)
| Note | This listing is for a single arm ONLY |
| Motor mounting holes | 16mm to 25mm |
| Weight | 62 grams. (DJI Stock arms 54g) |
| http | //www.readymaderc.com/store/index.php?main_page=product_info& |
Features:, , : Users should verify that the motor mount screws don't go in too far into their motor since these arms are thinner than the stock arms!!!, : For larger diameter motors, when using the legs, you simply need to use these spacers:,
Please do not back order. V1.5 - Weight has been ...ReadyMadeRC
AIMDROIX ALUMINUM ARMS FOR DJI MULTIROTORS (HEX PACKAGE)
| HEX PACKAGE | Includes 2 RED and 4 BLACK arms |
| Motor mounting holes | 16mm to 25mm |
| Weight | 68 grams. (DJI Stock arms 54g) |
Features:, , Note: Users should verify that the motor mount screws don't go in too far into their motor since these arms are thinner than the stock arms.,
We are proud to be the official worldwide distributor of ...ReadyMadeRC
AIMDROIX ALUMINUM ARMS FOR DJI MULTIROTORS (QUAD PACKAGE)
| QUAD PACKAGE | Includes 2 RED and 2 BLACK arms |
| Motor mounting holes | 16mm to 25mm |
| Weight | 68 grams. (DJI Stock arms 54g) |
Features:, , Note: Users should verify that the motor mount screws don't go in too far into their motor since these arms are thinner than the stock arms.,
We are proud to be the official worldwide distributor of ...Flying-Hobby
T-REX 500 PRO DFC COMBO
| ● Length | 868mm |
| ● Height | 275mm |
| ● Main Blade Length | 425mm |
| ● Main Rotor Diameter | 978mm |
| ● Tail Rotor Diameter | 206mm |
| ● Motor Drive Gear | 12T |
| ● Main Drive Gear | 134T |
| ● Autorotation Tail Drive Gear | 145T |
| ● Tail Drive Gear | 36T |
| ● Weight(With Motor) | 1210g |
Remark :, All T-REX 500 DFC Combo have change to this canopy -, Specification(T-REX 500 PRO DFC) :, ●Features, Specification(T-REX 500 PRO DFC) :, ● Drive Gear Ratio: 1:11.17:4.03, Accessories:, ●T-REX 500PRO DFC Kits Set X1, Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
HC5112 ●Equipped with the low CG DFC rotor head, effectively ...Flying-Hobby
800 CARBON FIBER BLADES
| ●Shape | Symmetrical wing |
| ●Length | 800x70x8.8mm |
| ●Width | 14mm |
| ●Shaft Diameter | 5mm |
| ●Weight | Appro 445g/set |
Instruction:, ●Use for T-REX 700N / 700E / 700E F3C upgarde , must with 800 Upgrade Tail Assembly(, Specification:,
H80001 ). ●For superior stability and resistant to wind gusts.Flying-Hobby
600D 3G CARBON FIBER BLADES (H60196)
| ●Shape | Symmetrical wing |
| ●Length | 600x55x7.5mm |
| ●Width | 12mm |
| ●Shaft Diameter | 4mm |
| ●Weight | 265g/set |
Instruction:, ●Use for T-REX 600 3G Flybaless System., Specification:,
●3G carbon main blades with CG shifted outwards, and slight ...Flying-Hobby
T-REX 600E PRO DFC FUTABA 6J 2.4G RTF COMBO
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 1174mm |
| ● Height | 319mm |
| ● Width | 210mm |
| ● Main Blade Length | 600mm |
| ● Main Rotor Diameter | 1347mm |
| ● Tail Rotor Diameter | 260mm |
| ● Motor Drive Gear | 13T |
| ● Main Drive Gear | 112T |
| ● Autorotation Tail Drive Gear | 131T |
| ● Tail Drive Gear | 34T |
| ● Weight(With Motor) | 2290g |
Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Specification(T-REX 600E PRO DFC) :, ●Features, Specification(T-REX 600E PRO DFC) :, ● Drive Gear Ratio: 1:8.61:3.85, Accessories:, ●T-REX 600E PRO DFC Kits Set X1, Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
T-REX 600E PRO DFC 1 Castle ICE2 HV 80 Brushless ...Flying-Hobby
T-REX 500PRO DFC FUTABA 8J RTF COMBO (DFC VERSION)
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 868mm |
| ● Height | 275mm |
| ● Main Blade Length | 425mm |
| ● Main Rotor Diameter | 978mm |
| ● Tail Rotor Diameter | 206mm |
| ● Motor Drive Gear | 12T |
| ● Main Drive Gear | 134T |
| ● Autorotation Tail Drive Gear | 145T |
| ● Tail Drive Gear | 36T |
| ● Weight(With Motor) | 1210g |
Remark :, All T-REX 500 DFC Combo have change to this canopy -, Combo Included :, ●T-REX 500PRO DFC Kits Set X1, Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., 3GX Programmable Flybarless System:, T-REX 500 PRO DFC:, ●Features, :, ● Drive Gear Ratio: 1:11.17:4.03,
HC5112 ●3GX Flybarless System X1 set ●425 3G Carbon fiber ...